User Guide
RH-23 Company confidential
CCS Technical Documentation
Page 48 Nokia Corporation. Issue 1 03/2004
Audio faults
Figure 41: Audio (earpiece) failure teoublehooting
Audio
faults
N
o
Check earpiece contact springs
from failing Upper Block . Check
also X1100, L1100, C1100,
R1111, R1110 and lines.
Change failing part. Retest.
Yes
No
Set phone to LOCAL mode. Using
Phoenix Audiotest select:
“Ext microphone in Hp speaker
out”
and set Loop “On”
Check X302, L150,
C155, R151, R152 and
line. If OK, change UEM.
No
Yes
Check L102, C116,
C150, R153, C159,
R158, R172 and line.
If OK change UEM
No
Earpiece
2
Yes
Audio
faults 2
Figure 15: Audio (earpiece) failure troubleshooting
Can you hear proper
audio from earpiece? (no
distortion)
Yes
Test lower block in
module jig with
functional upper block.
OK?
Measure DC- offset voltage
between earpiece lines and
GND. Is it ~1.38V?
Failure in upper block or
Hinge flex
Failure in lower block
Measure MICB2 voltage from
XMICP (L102 input). Is it ~2.1V?










