User Guide

NSB-5
Service Software PAMS Technical Documentation
Page 84 Nokia Mobile Phones Ltd. Issue 1 03/01
shorter tone about 10 seconds later. If you do not hear this, you must reflash the phone,
possibly with a different SW version.
9. At this point, you have completed the flash process. All that remains to be done is to
set the market varient. WinTesla should now display the "Restore Default User Settings"
dialog box. When this happens, disconnect the phone from the communications cable.
You may also get a warning message about date/time not setting. If so, dismiss it.
10. Insert a SIM card. Issue factory reset *#7370# into the phone. The password is
“12345”.
11. Reconnect the phone.
12. From the "Restore Default User Settings" dialog box, select the "Market Area" you
need and modify the "Default Settings" as desired. Then click the OK button. Disconnect
the phone from the communications cable.
NOTE: If you saved the user settings in Step 5, the settings will automatically be restored
in Step 10.