User Guide

PAMS Technical Documentation Service Software
NSB-5
Issue 1 03/01 Nokia Mobile Phones Ltd. Page 75
Alt, DO Operator settings: Reading from ME.....
Command is used to set the operator settings to the MS.
Figure 44: Operator Settings Dialog
Dialog mode: modal
The “Operator Settings” dialog box has the following items:
Displays the current operator settings.
Country Code edit box (ALT+C):
Allows the user to change the country code.
Network Code edit box (ALT+N):
Allows the user to change the network code.
Operator Name edit box (ALT+O):
Allows the user to change the operator name.
Save button (ALT+S):
Saves the data in the phone and close the dialog.
Reset button (ALT+R):
Resets the data to default values and saves it to the phone.
Cancel button (ESC):
Close the dialog without saving settings in the phone.
Help button (ALT+H):
Context-sensitive help.
Flash Phone... command
A full set of flash programming boxes and a service battery or the Point Of Sale flash
adapter is needed, together with the MCU software package (including the NSB-5.INI
file), to perform a flash programming of the phone.
NOTE: If using a Point Of Sale device, remember to enable it from the FLS-X dialog box
in the Configure menu.