User Guide

NSB-5
Service Software PAMS Technical Documentation
Page 74 Nokia Mobile Phones Ltd. Issue 1 03/01
When checked, the operator logo is stored in the phone.
Dealer Welcome Note check box (ALT+D):
When checked, a dealer welcome note is stored in the phone.
Voice Mailbox check box (ALT+V):
When checked, the voice mailbox settings are stored in the phone.
VAS Settings check box (ALT+A):
When checked, the value=added service settings are stored in the phone.
Emergency Numbers check box (ALT+A):
When checked, the Emergency Numbers are stored in the phone.
Market Area drop list (ALT+M):
Enables the user to select the market area where the phone is to be used. Depending on
what settings are relevant to a market area, the Default Settings check boxes will be
enabled. They are all disabled (greyed) as default.
OK button (ENTER):
Stores the selected settings in the phone and closes the dialog.
Cancel button (ESC):
Closes the dialog without storing anything to the phone.
Help button (ALT+H):
Context-sensitive help.
Set UI/DEV Default Values... command
Activation Status Bar Text
Alt, D, V Setting UI defaults...
Initializing normal mode...
After selection, the application asks for confirmation: “Are you sure you want to set UI to
factory settings?” If the Yes button is selected, the default settings are reset to phone.
Figure 43: UI/DEV Factory Settings Confirmation Dialog
Dialog mode: modal
Operator Settings.......command
Activation Status Bar Text