User Guide

NSB-5
Service Software PAMS Technical Documentation
Page 66 Nokia Mobile Phones Ltd. Issue 1 03/01
- user edits User Name (and IMEI, Product Code and Product Id, if they were not read
correctly from phone)
- dialog information is saved to file, which is sent to secure place where actual program-
ming information may be constructed
- programming information is received from secure place in another file, which is loaded
to dialog
- program checks input values and, if they are correct, programming information is writ-
ten to phone
This function opens the “Phone Identity” dialog box:
Figure 36: Phone Identity Dialog
Dialog mode: modal
The “Phone Identity” dialog box has the following items:
User Name edit box (ALT+U):
Field where user can enter user identification.
IMEI edit box (ALT+I):
Field where user can enter IMEI value. Field can contain up to 40 digits.
This field is automatically filled, if ME is connected to the PC when dialog is loaded.
Product Code edit box (ALT+P):
This field is automatically filled, if ME is connected to the PC when dialog is loaded. If it
is not correct then it is necessary to go to the Software | Production Data Edit dialog and
edit the Product Code there.