User Guide

NSB-5
Service Software PAMS Technical Documentation
Page 64 Nokia Mobile Phones Ltd. Issue 1 03/01
Save settings to a file on the PC.
Load File... button (ALT+O):
Load settings from a file on the PC.
Start Up Self-tests... command
Activation Status Bar Text
Alt, S,S MCU start Up Self-Tests.
Function is used for changing the state of the EEPROM selectable tests in the “MCU Start
Up Self-tests” dialog box.
Figure 34: MCU Start Up Self-tests Dialog
Dialog mode: modal
The “MCU Start Up Self-tests” dialog box has following items:
Tests list box (ALT+T):
When the dialog is opened, the previous values will be read from the MCU EEPROM and
shown on the list box.
Status group:
When radio button On is selected, the test will be run every time when automatic start
up self-tests are activated (e.g., in power up).
OK button (ENTER)
Selections are accepted and saved to EEPROM. A power-up routine is made to phone.
Cancel button (ESC)
Selections are ignored and control is returned back to main menu.
Selectable Start-Up self tests:
-PPM Validity
-A/D Converter
Set Factory Values... command
Activation Status Bar Text
Alt, S, V Setting