User Guide

PAMS Technical Documentation Service Software
NSB-5
Issue 1 03/01 Nokia Mobile Phones Ltd. Page 31
shown. If normal mode has been set successfully (no self-test error has been found), and
paging listening has been started, the used AFC value is requested from MS. Initializa-
tion routine checks the phone’s cellular type and, if unsupported phone is detected,
application unloads the DLLs.
The After Market SW automatically sets the MS state to local mode when needed. If
phone identification view is open, the window will be automatically updated. Also, if the
RF Information Window is open, it will be replaced with the quick info view.
Local Mode
Activation Status Bar Text
Alt, P, L Initializing local mode....;
Shift+F5
Selection will change the MS-state to local.
Band command
Activation Status Bar Text
Alt, P, B
Opens a submenu
GSM
Activation Status Bar Text
Alt, P, B, G
Selects the GSM band on the MS.
PCS
Activation Status Bar Text
Alt, P, B, P
Selects the PCS band on the MS.
Faultlog command
Activation Status Bar Text
Alt, P, F
Opens a submenu. Only enabled when a user has logged in.
Activate Faultlog
Activation Status Bar Text
Alt, P, F, A
F9
Activates the faultlog. Only enabled when a user has logged in.