User Guide

PAMS Technical Documentation Service Software
NSB-5
Issue 1 03/01 Nokia Mobile Phones Ltd. Page 15
install the PKD-1 between the PC and your printer cable. The PKD-1 should not affect
devices working with it. If errors occur (errors in printing are possible), please try printing
without the PKD-1. If printing is okay without the PKD-1, please contact your dealer.
Basic Hardware Configuration
Installing the Software on PC Hard Disk
The program is run protected by a DESKey SW protection device called a dongle. The
DESKey type PKD-1 provides access to the full tuning, flashing, and maintenance utilities
provided by WinTesla. A dongle must be present in parallel port when using the service
software.
First Time Installation of WinTesla
The following table lists the software required for a new installation using the POS flash
device. The SW is available on the Nokia PAMS page (http://www.nmp.nokia.com/pams).
The installation order of the SW is not critical, but installing the SW in the order of the
items listed in the table is suggested. It is not necessary to restart the PC after each
driver, but the PC must be restarted eventually. WinTesla will not sense the dongle until
the PC has been restarted. WinNT users must be logged on with Administrator’s rights to
install drivers.
Item Description Part No. EDMS Version
1WinTesla
wt_inst.exe
0774046 00040156 6.43
2 NSB-5 Service SW
Wt_nsb5.exe
8402075 271.03.03
3 HD955 Product SW
Nsb5AS330.exe
3.30
3DESKey Driver
Bdk2wn32.exe
31197 4.36