User Guide

NSB-5
Service Software PAMS Technical Documentation
Page 10 Nokia Mobile Phones Ltd. Issue 1 03/01
- Infrared test module JLP-1 (Product code: 0750079)
- Combox TDC-4 (Product code: 0630119)
- One of the following travel chargers:
Travel charger ACH-6E (Euro) (Product code: 0270381)
Travel charger ACH-6U (USA/Japan) (Product code: 0270382)
Travel charger ACH-6X (UK) (Product code: 0270380)
Flash Programming Equipment:
Either:
- Point of Sale Flash Adapter FLS-1 (Product code: 075T000)
or (the following can also be used instead of Combox TDC-4):
- Flash Security Box TDF-4 (Product code: 0770106)
- Flash Prommer sales package FPS-4S (Product code: 0085095)
- Service battery BBD-3 (Product code: 0775071)
One of the following travel chargers:
- Travel charger ACH-6E (Euro) (Product code: 0270381)
- Travel charger ACH-6U (USA/Japan) (Product code: 0270382)
- Travel charger ACH-6X (UK) (Product code: 0270380)
- DC power cable PCC-1B (Product code: 0770053)
Equipment Setup
Caution: Make sure that you have switched off the PC and printer before making con-
nections!
Connect the M2BUS service cable (DAU-9P) to the serial port (RS-232) of the computer.
Attach one end of the service cable to the PC serial port and the other end to the service
box (JBA-4). For servicing the phone with covers in place, the service box should always
be used. When the phone covers are removed, the jigs should be used.
For audio measurements, connect the audio cable (ADS-1) as follows:
- EAR line to AF INPUT of test equipment
- MIC line to MOD GEN OUTPUT of test equipment