Programmes After Market Services NSB-5 Series Transceivers Disassembly Instructions Issue 1 03/01 Nokia Mobile Phones Ltd.
NSB-5 Disassembly Instructions PAMS Technical Documentation 1. Remove the Battery 2. Remove Dust Cap & Rubber Plugs 3. Remove the Screws (6x) 5. Pull out Antenna note: snap fitting 4. Lift off B-Cover Page 2 Nokia Mobile Phones Ltd.
NSB-5 Disassembly Instructions PAMS Technical Documentation 6. Lift off the PCB 7. Remove the Slide Sensor Switch 8. Pull out the Slide until the End Stop Issue 1 03/01 Nokia Mobile Phones Ltd.
NSB-5 Disassembly Instructions PAMS Technical Documentation 10. Use a pair of Tweezers to push the Slide Stopper Spring in the direction indicated. 11. Simultaneously with step 10: Pull out the Slide past the End Stop ! note: Pull out straight ! ! DO NOThandle the Slide like this ! ALWAYS handle the slide like this. The metal slide is very easily bent when it is not protected by the phone. Avoid bending of the plungers at all times. Page 4 Nokia Mobile Phones Ltd.
NSB-5 Disassembly Instructions PAMS Technical Documentation 12. Bend open one side of the (plastic) Slide Cover and take out the Metal Slide. 2 1 ! DO NOT ! ALWAYS Hold the Metal Slide like this. The Metal Slide is bent very easily when not protected by the phone. Avoid bending of the Plungers at all times. Handle the Metal Slide like this. The Metal Slide can be held by the Targa Bow or by one of the Plungers.
NSB-5 Disassembly Instructions PAMS Technical Documentation 13. Remove the Display Assembly 14. Remove the Keymat Module 15. Remove the Speaker and the Roller Key Page 6 Nokia Mobile Phones Ltd.
