User Guide

PAMS Technical Documentation CARK 64 / 91 Installation Guides
NSB-5
Issue 1 03/01 Nokia Mobile Phones Ltd. Page 7
Component Parts
Phone Holder MBC–1
The holder allows the phone to be firmly located in a convenient position. The holder is
attached to the vehicle’s interior using the swivel mount HHS–9, or the mounting plate
MKU–1. The mounting must be secured with a screw (included with HHS–9). The screw
recess can then be covered with the NOKIA logo plate.
Mounting Plate MKU–1 and Swivel Mount HHS–9
MKU–1 is a fixed position mounting plate; HHS–9 is a swivel mount which allows for
adjustable fixing. The two mounting plates are interchangeable.
Mobile Charger LCH–9
The mobile charger enables the phone to be charged via the vehicle’s cigarette lighter
socket. The charger connects to the phone via a d.c. jack socket located on the base of
phone. The supply voltage may vary between 11 and 32 V.
Installation and Testing
There are some important aspects that require special attention when positioning the
phone holder.
The positioning of the phone holder is the most important factor when trying to achieve
the most comfortable position for the user. The location of the holder should be selected
so that the visibility of the phone’s display is good under all lighting conditions, but not
so that the driver’s attention is easily distracted. The phone holder can be installed so
that only one of the release buttons is visible, as only one of the buttons needs to be
pressed to release the phone. The holder should be located so that the driver can easily
reach the keypad. Under no circumstances should the holder prevent the driver from
controlling or operating the vehicle in any way or observing traffic.
Once installed, the equipment should be tested to ensure that it is operating satisfacto-
rily and that the position of the unit does not impair the driver’s ability to control and
operate the vehicle in any way.
Use the phone to make a call when the vehicle is parked with the engine running. During
the call, switch off the engine. Ensure that the phone is operational both with the engine
running, and with the engine switched off.
For operating information refer to the User’s Guide supplied with the phone.