User Guide

NSB-5
System Module PAMS Technical Documentation
Page 16 Nokia Mobile Phones Ltd. Issue 1 03/01
Figure 4: Battery connector locations
Vibra Alerting Device
A special battery pack contains a vibra motor. The vibra is controlled with one PWM sig-
nal by the MAD2WD1 via the BTEMP battery terminal.
SIM Card Connector
The SIM card connector is located on the PCB. Only small SIM cards are supported.
Figure 5: SIM Card Reader Ultra phone
1+VBATT
2BSI
3BTEMP
4-VBATT
Table 4: SIM Connector Electrical Specifications
Pin Name Parameter Min Typ Max Unit Notes
1GND GND 0 0 V Ground
B side view.
12
34
No metal in these areas!
old connector type
phone
456
321