User Guide

PAMS Technical Documentation Service Tools
NSB-5
Issue 1 03/01 Nokia Mobile Phones Ltd. Page 7
Module Jig MJS-8
The Module Jig MJS-8 is used for component level repair of the system/RF module. *
Product Code
Module Jig MJS-8: 0775170
View of MJS-8
* Connect the External Antenna Cable XRC-1B, Service Cable SCH-5, and the DC Cable
PCS-1 to the MJS-8 jig.
The Service Cable SCH-5 can be replaced by the DAU-9P cable.
Note: The nominal supply voltage for MJS-8 is +4.1V. The supply voltage must not
exceed +6.0V.