User Guide

D 1
NAM 1
NAM 2
NAM 3
Select
NSW-5
Tuning and Flashing Instructions
PAMS Technical Documentation
Page 17
Issue 1 10/00
 Nokia Mobile
Phones Ltd.
Complete NAM Programming InstructionsnENNDPORTABLES
Access NAM Programming Mode:
1. Turn the phone on.
2. Enter the NAM access code.
Factory default is: * 3 0 0 1 # 1 2 3 4 5 #
3. If the screen to the right appears, the access code was entered cor-
rectly.
If after several attempts you can not access NAM programming, it is
possible that the NAM 2 access code has been changed, or the phone is
in need of service.
MAIN MENU Selection
4. Press the [Scroll–Key] up or down until the indicator highlights the de-
sired menu option. Select from the following:
NAM_1 NAM_2 NAM_3 Security Emergency
SW version Serial No. Programmed Field Test
5.Press the [Select] softkey to access the Sub–Menu from and of the
above Main Menu selections.
Programming NAMs 1 through 3
6. If the value is incorrect, press the [Select] softkey and use the keypad
to enter new information.
Home
system
ID
Home SOC
(when un-
locked)
Mobile
station
Alpha
tag
Mes-
sage
center
number
PSID/
RSID
lists
Change
defaults
see be-
low
Change defaults
NAM Status
(Enable/Disable)
Access method Local option Primary paging
channel
Secondary paging
ch
Dedicated A cch Dedicated A cch
number
Dedicated B cch
Dedicated B cch
number
Overload class Group ID SID alpha tag con-
trol
A–key code Public systems Private systems Residential sys-
tems