Cell Phone User Guide

[ 59 ]
Security settings
Lock code
You’ll need the lock code to activate and deactivate Phone Lock, or to
change your lock code. The default lock code is
1234
. If you enter an
incorrect lock code five times in a row,
your
phone will prompt you for
the security code (see page 58).
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter
Menu 4-4-2-4
(
Settings
-
Security settings
-
Access codes
-
Change lock code
) and press
Select
.
2. Enter current (or default) lock code and press
OK
.
3. Enter new lock code, press
OK
.
4. Re-enter new lock code for verification, press
OK
.
Note:
When you change your lock code, make sure you store it in a safe
place, away from your phone. Avoid entering access codes similar
to emergency numbers to prevent accidental emergency calls.
• Call restrictions
This feature allows you to restrict incoming and outgoing calls. Outgoing
calls are restricted from a list of restrictions that you create yourself.
Incoming calls are restricted to the
All calls
option (you cannot create a
list of restrictions for incoming calls).
Restricting outgoing calls
Upon selecting
Restrict outgoing calls
from the menu, you are presented
with the following options:
•
Select
allows you to select call restrictions from the outgoing calls list.
Note:
This menu option is available only when one restriction has
been enabled.
•
Add restriction
allows you to create your own list of outgoing call
restrictions.