Cell Phone User Manual

Assign a phone number to a number key
1 Select the number key to which you want to assign the phone number.
1 (
) is reserved for the voice mailbox.
2 Select the contact from your contacts list.
Remove or change a phone number assigned to a number key
Select and hold the assigned key, and from the pop-up menu, select Remove or
Change.
Make a call
On the home screen, select
, then select and hold the assigned number key.
Use your voice to call a contact
You can use your voice to make calls or control your phone.
Voice commands are not dependent on the speaker’s voice. Commands are
automatically created by your phone.
When adding contacts or editing voice commands, do not use very short or similar
names for different contacts or commands.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
When you use voice dialling, the loudspeaker is in use. Hold the phone a short distance
away when you say the voice command.
1 On the home screen, press and hold the call key. If a compatible headset with the
headset key is attached, press and hold the headset key.
2 A short tone sounds, and Speak now is shown. Say clearly the name that is saved
for the contact.
3 The phone plays a synthesised voice command for the recognised contact in the
selected phone language, and shows the name and number. To cancel the voice
dialling, select Quit.
Listen to a voice command for a contact
1 Select a contact and
> Voice tag details.
2 Select a contact detail.
If several numbers are saved for a name, you can say also the name and the number
type, such as mobile or telephone.
46 Telephone