User Guide

CCS Technical Documentation 5 - Service Software Instructions
Company Confidential RH-26
Issue 1 02/04 Copyright ©Nokia. All rights reserved. Page 67
4 Tuning automatically moves to the next step, EGSM 1800 with EDGE on, when
you press “Save & Continue”.
GSM1800 band with EDGE On
1 To begin tuning, click “Start”.
2 Set spectrum analyzer to required settings for GSM1800 band => OK.
3 Repeat the same tuning steps as for the EGSM850 band above.
4 Tuning automatically moves to the next step, EGSM 1900 with EDGE off, when
you click “Save & Continue”.
GSM1900 band with EDGE Off
1 To begin tuning, click “Start”.
2 Set spectrum analyzer to required settings for GSM 1900 band=> OK.
3 Repeat the same tuning steps as for the EGSM850 band above.
4 Tuning automatically moves to the next step, EGSM 1800 with EDGE on, when
you click “Save & Continue”.
GSM 1900 band with EDGE On
1 To begin tuning, click “Start”.
2 Set spectrum analyzer to required settings for GSM 1900 band=> OK.
3 Repeat the same tuning steps as for the EGSM850 band above.
4 To complete tuning, click “Save & Continue”.
5 To close the “Tx I/Q Tuning” dialog, click “OK”.