User Guide

CCS Technical Documentation 5 - Service Software Instructions
Company Confidential RH-26
Issue 1 02/04 Copyright ©Nokia. All rights reserved. Page 61
16 To complete tuning, click “Save & Continue”.
17 To end tuning, close the “RX Band Filter Response Compensation” dialog.
RX AM suppression
RF generator is needed (AM modulation).
Must be done separately on all bands!
Start RX calibration at EGSM (GSM850), then at GSM1800 band and finally at the
GSM1900 band.
This tuning dialog performs RX AM suppression tuning.
Remember to take jig and cable attenuations into account!
To calibrate:
1 From the “Tuning” menu, choose “Rx Am Suppression”.
2 Set RF signal generator to correct settings displayed on the left-hand side win-
dow.