User Guide

RH-26 Company Confidential

5 - Service Software Instructions CCS Technical Documentation

3 click “Stop”.

4 To end tuning, close the “RX Channel Select Filter Calibration“ dialog.

RX calibration

RF generator is needed.

This tuning performs RX calibration.

Must be done separately on all bands!

RX calibration is done first at EGSM (GSM850), then continues at the GSM1800 band

and finally ends at the GSM1900 band.

AFC tuning is done while EGSM (GSM850) band RX calibration is performed.

Remember to take jig and cable attenuations into account!

To calibrate:

1 From the “Tuning” menu, choose Rx Calibration.

Calibrating EGSM850 band

2 To begin, click “Start”.