User Guide

RH-26 Company Confidential

5 - Service Software Instructions CCS Technical Documentation

Baseband Tunings

Energy management tuning

External power supply is needed.

EM calibration is used for calibrating battery and charger settings of the phone.

To calibrate:

1 Connect the DC Cable SCB-3 between JBV-1 and the Vin of phone for charger

calibration.

2 Connect 12…15 V from power supply to JBV-1.

NOTE! Check that connection is F-BUS (does not work with M-BUS!).

3 From the “Tuning” menu, choose “Energy Management Calibration”.

Energy Management values to be calibrated are checked.

4 To show current values in the phone and to check that the communication works,

click “Read From Phone”.