User Guide

CCS Technical Documentation 5 - Service Software Instructions

Company Confidential RH-26

11 To start JBV-1 SW update, double click fwup.exe.

JBV-1 firmware update starts and shows the current status of the connected

JBV-1.

If the firmware version read from your JBV-1 is not the latest one available ( v. 17

or older), it needs to be updated to version 18. To do this, click “Update Firm-

ware”.

If you simply want to check the SW version, click “Refresh Status”.

12 To update your JBV-1 to the latest version 18, choose file JBV1v18.CDE and

“Open”.

Please wait, it takes a while until you can hear a “click” from the JBV-1.

The older sw file JBV1v17.CDE is visible in this view only if the previous JBV-1 SW

package has been installed on your computer.

13 Click “OK”.