User Guide

RH-26 Company Confidential

5 - Service Software Instructions CCS Technical Documentation

6 After successful installation, click “Finish” to complete.

7 Connect the USB cable / JBV-1 to your computer.

8 Connect power to JBV-1 (11-16V DC) from external power supply, then connect

USB cable between JBV-1’s USB connector and PC.

9 Install or update the JBV-1 USB drivers which are delivered with the JBV-1 SW

installation package. They can be found in folder:

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver

If there is no previously installed JBV-1 firmware update package installed on

your computer, Windows detects the connected USB cable and drivers for the

new HW. Please follow the instructions and allow Windows to search and install

the best drivers available.

If there is a previously installed JBV-1 firmware update package ( v 17 or older)

on your computer, please update the JBV-1 USB driver. Please see the readme.txt

file under:

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver

for instructions on how to update the JBV-1 USB driver.

After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW

update begins.

10 Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware

Update.