User Guide

CCS Technical Documentation 5 - Service Software Instructions

Company Confidential RH-26

JBV-1 Docking Station SW

The JBV-1 docking station is a common tool for all DCT-4 generation products. In order

to make the JBV-1 usable with different phone models, a phone specific docking station

adapter is used for different service functions.

The JBV-1 docking station contains software (firmware) which can be updated.

You need the following equipment to be able to update JBV-1 software:

• PC with USB connection

• Operating System supporting USB (Not Win 95 or NT)

• USB cable (can be purchased from shops or suppliers providing PC

hardware and accessories)

• JBV-1 docking station

• External power supply 11-16V

Before installation

Download the Jbv1_18_update.zip file to your computer (e.g. C:\TEMP) from your down-

load web site.

Close all other programs.

Follow instructions on the screen.

Installing SW needed for the JBV-1 SW update

Note: DO NOT CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER YET!

To install the needed SW:

1 To run the Jbv1_18_update.zip file, double click “Setup.exe”.

Files needed for JBV-1 package setup program are extracted.

Installation begins, please read the information displayed.