User Guide

72 Copyright © Nokia 2003
• ADJUST THE VOLUME
Use the volume key on the side of the phone to adjust volume for both the headset
and the loudspeaker. See “Understand your phone” on page 7.
• CHOOSE STEREO OR MONO
1 While listening to a frequency, press Options.
2 Scroll through the menu to Stereo output, and press Select. The radio is set
to provide audio in stereo.
OR
Scroll to Mono output, and press Select.
• HANDLE CALLS WHILE LISTENING TO THE RADIO
Incoming calls
When you get an incoming call, the radio is muted. Answer the call as normal. (See
“Call functions” on page 21.) When you end the call, the radio automatically turns
on again, with the same frequency and volume setting as set before the call.
Outgoing calls
All functions for placing outgoing calls are available, including voice dialing (See
“Call functions” on page 21 and “Voice dialing” on page 52.) The radio remains on
until you press
d to make the call. If using voice dialing, the radio is muted as
soon as you press and hold Names. When you end the call, the radio automatically
turns on again, with the frequency and volume settings unchanged.
Important: You cannot turn on the radio during a call.
Incoming messages
When you get an incoming text, e-mail, or fax message, the radio is muted briefly
by the incoming message tone (depending on the profile you have set). The radio
stays on while you access all the incoming message functions.
When an application using a GPRS or CSD connection is sending or receiving data,
it may interfere with the radio.
Voice commands
The voice commands feature lets you control some radio functions with your voice.
Radio functions include “On,” “Off,” “Next channel,” and “Previous channel.”
See“Voice commands” on page 80 for more information.