User Guide

Nokia 6800 User Guide 63 Copyright © Nokia 2003
Settings
Select Ringing volume and Vibrating alert for incoming voice calls and incoming
messages. The vibrating alert does not work when the phone is connected to a
charger, a desktop stand, or a car kit.
Tip: If you receive a ringing tone using OTA or by downloading, you can
save the ringing tone in the Gallery.
Select Message alert tone to set the alert tone for the incoming messages, select
Keypad tones, or Warning tones to set the phone to sound tones, for example,
when the battery is running out of power.
Select Alert for to set the phone to ring only upon calls from phone numbers that
belong to a selected caller group. Scroll to the caller group you want or All calls
and press Mark.
• ACCESSORY SETTINGS
The Accessory settings menu is shown only if the phone is or has been connected
to one of the following accessories: a headset, a handsfree unit, or a mobile
inductive loopset.
Select Menu > Settings > Accessory settings, and then select Headset, Handsfree,
or Loopset if the corresponding accessory is or has been connected to the phone.
• Select Default profile to select the profile that you want to be automatically
activated when you connect to the selected accessory. You can select another
profile while the accessory is connected.
• Select Automatic answer to set the phone to answer an incoming call
automatically after five seconds. If the Incoming call alert is set to Beep once
or Off, automatic answer will not be in use.
• Select Lights to set the lights permanently to On. Select Automatic to set the
lights on for 15 seconds after a keypress. The Lights option is available only
when Handsfree is selected.
If you want to use a TTY adapter, you must select Menu > Settings > Accessory
settings > TTY/TDD and change the setting from No to Yes. If you are not using a
TTY adapter, make sure that the TTY/TDD option is set to No because an active TTY/
TDD setting may prevent other accessories from functioning properly. For more
information on using a TTY adapter, see “Phone adapter HDA-10” on page 116.
• SECURITY SETTINGS
Note: When security features that restrict calls are in use (call restrictions,
closed user group, and fixed dialing), calls may be possible to certain
emergency numbers in some networks (for example 911 or other official
emergency numbers).
Select Menu > Settings > Security settings, and then select PIN code request, Call
restrictions, Fixed dialing, Closed user group, Security level, or Access codes.