User Guide

Your phone
11
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
Bluetooth connectivity has been set to On.
Data is being transmitted using a Bluetooth
connection.
A USB connection is active.
You have an e-mail that has not been read, waiting
for you to retrieve to your phone.
Help
Your phone has a help function. To access it from an
application, select Options > Help.
For example, to view instructions on how to create a contact
card, start to create a contact card, and select
Options >
Help; or select My own > Help to open the instructions for
Contacts. While reading instructions, to switch between Help
and the application that is open in the background, press and
hold the menu key.
Keypad lock (keyguard)
Use the keypad lock to prevent the keys from being
accidentally pressed.
To lock the keypad, in the standby mode, press the left
selection key, then *. When the keys are locked, is
shown on the display. To turn on the display light when
the keypad lock is on, press the power key.
To unlock the keypad, press the left selection key, then * .
When the keypad lock is on, calls still may be possible to the
official emergency number programmed into your device.
Antenna
Your device has an internal antenna.
Note: As with any other radio
transmitting device, do not
touch the antenna unnecessarily
when the device is switched
on. Contact with the antenna
affects call quality and may
cause the device to operate
at a higher power level than
otherwise needed. Avoiding contact with the
antenna area when operating the device optimizes
the antenna performance and the battery life.