Cell Phone User's Manual

Tools

active during voice calls. To check the active data

connections, see ‘Connection manager’, p. 82.

The following indicators may be displayed below the signal

indicator, depending on which network you use:

GSM network, packet data is available in the network.

GSM network, packet data connection is active, data is

being transferred.

GSM network, multiple packet data connections are

active.

GSM network, packet data connection is on hold. (This

can happen during a voice call, for example.)

Receive access point settings

You may receive access point settings in a text message

from a service provider, or you may have preset access

point settings in your phone. See ‘Data and settings’, p. 48.

To create a new access point, select Tools > Settings >

Connection > Access points.

An access point may be protected ( ) by your network

operator or service provider. Protected access points

cannot be edited or deleted.

Access points

Options in the Access points list are Edit, New

access point, Delete, Help, and Exit.

Follow the instructions given to you by your service

provider.

Connection name—Give a descriptive name for the

connection.

Data bearer—Depending on what data connection you

select, only certain setting fields are available. Fill in all

fields marked with Must be defined or with a red asterisk.

Other fields can be left empty, unless you have been

instructed otherwise by your service provider.

Options when editing access point settings are

Change, Advanced settings, Help, and Exit.

To be able to use a data connection, the network service

provider must support this feature, and if necessary,

activate it for your SIM card.

Access point name (for packet data only)—The access

point name is needed to establish a connection to the

packet data network. You obtain the access point name

from your network operator or service provider.

Tip! See also ‘Receive MMS and e-mail settings’, p.

47, ‘E-mail’, p. 54, and ‘Access the Web’, p. 60.

User name—The user name may be needed to make a data

connection, and is usually provided by the service

provider. The user name is often case-sensitive.