Nokia Customer Care RH-51/52, RH-67/68 Series Cellular Phones 4 - Service Tools Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care This page has been deliberately left blank Page 2 © 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools Table of Contents Page No JBV-1 docking station and DA-18 adapter ....................................................................................... 5 SF-21 POS (point of sales) flash adapter........................................................................................... 6 SA-29 RF adapter ............................................................................................................................
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care This page has been deliberately left blank Page 4 © 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools JBV-1 docking station and DA-18 adapter The JBV-1 docking station has been designed for calibration and software update use. The DA-18 docking station adapter makes signal connections to the phone. JBV-1 and DA-18 are used as one unit.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care SF-21 POS (point of sales) flash adapter The POS flash adapter SF-21 is used in the place of phone’s normal battery during service to supply a controlled operating voltage and to connect to flash pads. Product code SF-21 POS flash adapter: 0770685 Spare parts for SF-21 Test pin module: 0780357 Test pins: 0770754 (APAC/China only, soldering required) View of SF-21 Operations: 1 Page 6 Open the locking slide.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools 2 Insert the adapter to the phone from battery connector side. 3 Lock the adapter with DC jack. Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care SA-29 RF adapter SA-29 RF adapter is used for RF measurement. A-cover and antenna module need to be removed to attach SA-29. Product code SA-29 RF support adapter: 0770686 View of SA-29 RF attenuations GSM850: 0.0 - 0.1 EGSM900: 00 - 0.0 DCS1800: 0.4 - 0.5 PCS1900: 0.4 - 0.5 Page 8 © 2004 Nokia Corporation.
Company Confidential RH-51/52, RH-67/68 4 - Service Tools Nokia Customer Care SA-57/59 RF coupler (US region only) SA-57/59 RF coupler is used for RF testing with DA-18 Docking station adapter. These couplers are intended only for pre-testing in US. • SA-57 for RH-51, RH-67 (GSM 850/1800/1900) • SA-59 for RH-52, RH-68 (GSM 900/1800/1900) Note: Tuning with SA-57/59 is not allowed.
RH-51/52, RH-67/68 4 - Service Tools GSM 1800 GSM 1900 Page 10 Company Confidential Nokia Customer Care 512 4.5 5 5.7 6 700 3.6 5 5.4 7 885 3.5 5 5.8 7 512 4.0 4 6.8 6 661 3.3 4 6.2 6 810 3.0 4 5.7 8 © 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools MJ-25 module jig The MJ-25 module jig is used for testing the following modules: • User interface • Baseband and RF on system module Product code MJ-25 module jig: 0770683 Spare parts for MJ-25 Spare part module (LCD-UIB PWB): 0780356 Spare part module (KeyPad-UIB PWB): 0780355 Test pins: 0770879 Test pins (RF pogo): 077876 Fuse and protector: 0770622 Optional parts for MJ-25 (not included in MJ-25 sales pack) SA-58 RF cou
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care The supply voltage must not exceed +12.0 V (min. 5.0 V). Supply the power to jig only when the jumper is open = regulated.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools RJ-22 soldering jig The soldering jig RJ-22 is used for soldering and as a rework jig for system module. It is made of lead free rework compatible material. Product code RJ-22 soldering jig: 0770684 View of RJ-22 SS-15 camera rework tool The camera rework tool SS-15 is used to remove/attach the camera module (NMP code: 4858045) from/to the socket on the phone PWB.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care SK-8 LGA rework kit for Kaede (sales package) SK-8 is used to print solder paste on Kaede USB component (NMP code: 4342163) when the component is reworked. SK-8 consists of ST-9 Stencil and RJ-29 rework jig.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools 2 Once the best fit location has been found, leave the component there and put the stencil on top of the jig and the component. 3 Put soldering paste on the component properly. 4 Remove the stencil and the component from the jig. 5 Start the soldering process. Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care SK-9 LGA rework kit for MicroPA (sales package) SK-9 is used to print solder paste on mircoPA component (NMP code: 4355641) when the component is reworked. SK-9 consists of ST-13 stencil and RJ-21 rework jig. Sales package includes: ST-13 stencil: 0770848 RJ-21 rework jig: 0770849 Product code SK-9 LGA rework kit for microPA sales package: 0274819 View of SK-9 (left ST-13, right RJ-21) Rework procedure Refer to SK-8.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools SW security device PKD-1 SW security device is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of the PC. Without the dongle present it is not possible to use the service software. Printer or any such device can be connected to the PC through the dongle if needed.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care FLS-4S POS (point of sale) flash device (sales pack) FLS-4S is a dongle and flash device incorporated into one package, developed specifically for POS use. Product code FLS-4S sales pack – Europe/Africa: 0080541 FLS-4S sales pack – APAC: 0080542 FLS-4S sales pack – Americas: 0080543 View of FLS-4S Page 18 © 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools FPS-8 FLASH prommer (sales pack) The FLASH prommer FPS-8 is used for example with SF-21, DA-18 and JBV-1. Power is supplied to FPS-8 from the Universal Power Supply.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care ACF-8 universal power supply ACF-8 universal power supply is used to power FPS-8. ACF-8 has 6V DC and 2.1A output. Product code ACF-8 universal power supply: 0680032 View of ACF-8 Page 20 © 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools XCS-1 service cable The XCS-1 service cable is used to connect FLS-4S to SF-21 for supplying a controlled operating voltage and data connection. Product code XCS-1 service cable: 0730218 View of XCS-1 XCS-4 modular cable XCS-4 is a shielded (one specially shielded conductor) modular cable for flashing and service purposes. Product code XCS-4 Modular cable: 0730178 View of XCS-4 Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care PCS-1 power cable The PCS-1 power cable (DC) is used with JBV-1 or MJ-25 to supply a controlled operating voltage. Product code PCS-1 power cable: 0730012 View of PCS-1 FLC-2 DC cable FLC-2 is used with SF-21 to supply a controlled operating voltage. Product code FLC-2 DC cable: 0730185 View of FLC-2 Page 22 © 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools AXS-4 service cable The AXS-4 D9-D9 service cable is used to connect two 9 pin D connectors for example between PC and FPS-8. Cable length is 2 meters. Product code AXS-4 D9-D9 service cable: 0730090 View of AXS-4 Printer cable This cable is used to connect the PC to FPS-8. Product code Printer cable: 0730029 View of printer cable Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care DAU-9S MBUS cable The MBUS cable DAU-9S has a modular connector and is used for example between the PC`s serial port and module jig MJ-25, SF-21 or JBV-1. Product code DAU-9S MBUS cable: 0730108 View of DAU-9S SCB-3 DC cable The DC cable SCB-3 is used to connect JBV-1 to the phone charger jack for ADC/VCHAR/ ICHAR calibration. Product code SCB-3 DC cable: 0730114 View of SCB-3 Page 24 © 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-51/52, RH-67/68 4 - Service Tools XRF-1 RF cable The XRF-1 RF cable is used to connect for MJ-25 or SA-29 to RF measurement equipment. Product code XRF-1 RF cable: 0730085 View of XRF-1 Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 4 - Service Tools Company Confidential Nokia Customer Care JBT-9 Bluetooth test and interface box (sales pack) The JBT-9 testbox is a generic device to perform Bluetooth bit error rate testing and doing cordless FBUS connection via Bluetooth. An ACP-8x charger is needed for BER testing and AXS-4 cable in case of cordless testing interface usage.
