User Guide

nokia

CONNECTING PEOPLE

PAGE 13 (25) Approved 2.0

Customer Care EMEA

DJk

Technical Services, Repair Concepts Confidential 21.01.2004

Open the connector carefully by using the SRT-6.

The Display is attached with four snaps to the Engine

Shield. Release the snaps by using SRT-6.

The same procedure on the other side of Display.

Now, the Display can be removed.

Push down the Earpiece from its guidance carefully. A

screwdriver can be used for this. Do not damage the

spring contacts of the Earpiece. Note the right position

of the guiding pin from the Earpiece when assembling.

Unscrew the two TORX PLUS® size 6 screws, using the

order shown. For assembly, the reverse order and a

torque of 24Ncm have to be used.

There are two snaps, which lock the engine assembly.

Use the Opening Tool to release the snaps.

Now the engine assembly can be taken away.