User Guide

8. Fill in the power level values (in dBm) to the Wide Range table.

9. In the Wide Range pane, click Calculate.

10. In the High Burst pane, click Tune.

11. Setup the spectrum analyzer with the following settings:

Center frequency: 1950 MHz

Span: 0 Hz

Reference level offset: Cable attenuations + adapter attenuation

Reference level: 24 dBm

Input attenuation: Automatic

Resolution bandwidth: 5 MHz

Video bandwidth: 5 MHz

Sweep time: 20 ms

Detector: RMS detector

Average: No

Trigger: Video

Trigger level: 0 dBm

Marker: 250 us

Marker step: 500 us

RM-1

Nokia Customer Care RF Troubleshooting and Manual Tuning Guide

Page 7–48 Company Confidential Issue 1