User Guide

Issue 3 05/2005 COMPANY CONFIDENTIAL 89
Copyright © 2005 Nokia. All Rights Reserved.
NHL-12
3 - Service Software Instructions Nokia Customer Care
12. Reprogramming NHL-12
■ Connecting cables
Once you have the NHL-12 opened and the battery and SIM removed, attach it to the DA-9
adapter. When connected, the phone goes to local mode and the screen will not show anything
during the SW update.
Proceed as follows:
1. Connect XCS-4 cable from FPS-8 to JBV-1.
2. Connect PCS-1 cable from FPS-8 to JBV-1.
3. Connect USB cable from PC to DA-9.
4. Press the phone power key.
Phone starts in normal mode.
■ Backing up settings
When backing up settings, a quick way is to use the MMC user data backup, which can be
found at: Menu -> Extras -> Memory -> Options -> Backup phone memory.
If you flash the phone with Restore User Phone selected, then the same that is done with the
All Settings component is done automatically during flashing.
To back up settings:
1. Start Phoenix SW: double-click the Phoenix icon on your desktop.
2. Choose File -> Manage Connections.
3. Click USB.
If USB connection is not yet created, see chapter Managing Connections.
4. Click Apply, and then close the dialog.
5. Choose File -> Scan Product.
If the phone is OK, you should see the SW version in the lower right-hand corner,
of the screen, for example V1.31.0.
If the scan does not find anything, the phone is not functioning normally.
6. Click Product.
7. Click User Settings.
8. Click All Settings.
Please wait.
9. Click Browse.
10. From the C:\Program files\Nokia\Phoenix\Products\NHL-12\ directory,
choose NHL_12.ini.