Nokia Customer Care NHL-12 Series Transceivers 4 - Service Tools Issue 2 10/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
NHL-12 Nokia Customer Care 4 - Service Tools [This page intentionally blank] 2 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
NHL-12 4 - Service Tools Nokia Customer Care List of Recommended Service Tools ................................................................ 4 Service Tools and Requirements ...................................................................... 7 Service requirements ......................................................................................... 7 Supported operating systems .......................................................................... 7 Hardware requirements ....................
NHL-12 Nokia Customer Care 4 - Service Tools [This page intentionally blank] 4 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
NHL-12 4 - Service Tools Nokia Customer Care 1. List of Recommended Service Tools Type Short Description Code MJ-13 Module repair jig 0770666 SF-8 POS flash adapter to be used with FLS-4S / FPS-8 flash adapter 0770665 DA-9 Docking station adapter for JBV-1. 0770663 JBV-1 Flash/Test docking station with generic data & power interfaces 0770298 RJ-11 Soldering jig 0770667 MJS-76 LGA re-work jig 0770417 FPS-8 Flash prommer to be used with SF-20 or JBV-1 plus product specific adapter.
NHL-12 Nokia Customer Care 4 - Service Tools Type Short Description Code SA-5 RF adapter 0770664 CA-28DS Service data cable, XCS-1 with USB lines connected 0730319 ACF-8 Universal power supply 0680032 6 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
NHL-12 4 - Service Tools Nokia Customer Care 2. Service Tools and Requirements ■ Service requirements Supported operating systems • Windows 2000 (service pack 2) • Windows XP (service pack 1) Hardware requirements Minimum • Processor 233 MHz, RAM memory 64 MB, Disk space 50-100 MB. Recommended for Windows 2000 • Processor 700 MHz, RAM memory 512 MB, Disk space 50-100 MB. Service software The service software used is called Phoenix.
NHL-12 Nokia Customer Care 4 - Service Tools ■ Service Tools The following table describes the service tools, which are used to test, tune and calibrate the NHL-12 phone. For user instructions and procedures, please refer to Chapter 3 of this service manual. Type / Code JBV-1 0770298 DA-9 0770663 Description The JBV-1 docking station has been designed for calibration and software update use. The DA-9 docking station adapter makes signal connections to the phone. JBV-1 and DA-9 are used as one unit.
NHL-12 4 - Service Tools Nokia Customer Care RJ-11 0770667 RJ-11 soldering jig is used for soldering and as a rework jig for HL9 module. SF-8 0770665 SF-8 POS flash adapter is used in POS (Point of Sales) environment for software updating. It provides controlled supply voltage and necessary connections between the phone and the flash prommer. It substitutes for the phone’s standard battery during the software update. ACF-8 0680032 ACF-8 universal power supply is used to power FPS-8.
NHL-12 Nokia Customer Care 4 - Service Tools FPS-8 0080321 The flash prommer FPS-8 is used with DA9. Power is supplied to FPS-8 from the universal power supply. Sales pack includes: - FPS-8 prommer (0750123) - FPS-8 SW activation & installation instructions - FPS-8 activation sheet (9359289) - ACF-8 power supply (0680032) - AXS-4 service cable (D9-D9) (0730090) - Printer cable (0730029) FLS-4S 0080543 POS flash prommer for US incl.
NHL-12 4 - Service Tools Nokia Customer Care ACP-8U 0675196 Charger for JBT-9 Output: 5.3V DC, 500 mA; US Version DAU-9S 0730108 Serial data cable with modular connector. 9 pole Sub-D f <=> 8 pole modular The MBUS cable DAU-9S has a modular connector and is used for example between the PC’s serial port and module jig MJ-2, SF-2 or JBV-1. XCS-4 0730178 Modular cable for e.g. connection between FPS-8 and SF-20. XCS-4 is a shielded (one specially shielded conductor) for flashing and service purposes.
NHL-12 Nokia Customer Care 4 - Service Tools PCS-1 0730012 Power cable to connect e.g. JBV-1 to FPS8. 2 x Banana connectors to 5,5 mm DC plug. XRF-1 0730085 RF cable to connect e.g. module repair jig to RF measurement equipment. SMA to N-Connector ca. 610mm AXS-4 0730090 The AXS-4 D9-D9 service cable is used to connect two 9 pin D connectors e.g. between PC and FPS-8. Cable length is 2 meters. 12 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
NHL-12 4 - Service Tools Nokia Customer Care SCB-3 0730114 The DC cable SCB-3 is used to connect JBV-1 to the phone, for example. AXP-8 073F000 The parallel printer cable connects the parallel connector of the PC and the parallel input of the FPS-8. SRT-11 0770527 The camera removal tool SRT-11 is used to remove the camera from its locking connector. SES-3 4350383 SES-3 stencil is used with MJS-76 / 0770417 and it supports the PA component.
NHL-12 Nokia Customer Care MJS-76 4 - Service Tools This tool is used in LGA type component reworking purposes in central service centers. Parts list SA-5: 0770664 and XRS-11 0730265 SA-5 is RF adapter for measurement and tuning purposes. It can be used with RF cable XRS-11. SA-5 XRS-11: 14 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
NHL-12 4 - Service Tools Nokia Customer Care CA-28DS 0730319 Data cable for connections between FLS4S and SF-8. CA-28DS is shielded USB connected cable for flashing purposes. SRT-6 0770431 Opening tool Issue 2 10/2004 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
NHL-12 Nokia Customer Care 4 - Service Tools [This page intentionally blank] 16 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.