User Guide

NHL-10

System Module and User Interface CCS Technical Documentation

ISSUE 2 01/2004 COMPANY CONFIDENTIAL 7

Introduction

The system module NHL-10 consists of the Radio Frequency (RF) and Baseband (BB), includ-

ing the User Interface (UI) with Keyboard.

System Module Block Diagram

The NH4 System module is the engine board of the NHL-10 phone. It includes the baseband

and RF functions of the phone, as well as Bluetooth and camera modules. (See Figure 1.) Ex-

ternal interfaces are drawn as arrows crossing the NH4 border.

Figure 1: Module Block Diagram

The Accessory interface is provided by Bluetooth and 115.2kbit IR. Only the Headset & Charg-

er are galvanic interfaces.

Functional description

The heart of the BB is UPP_WD2, which includes the MCU, DSP and Digital Control Logic.

Power is supplied by the UEMK ASIC and a number of discrete regulators. Memory comprises

of 4 x 64Mbit Flash Memory Devices and 128 Mbit (16 Mbytes) SDRAM.

There are two audio transducers (Earpiece 8 mm and IHF Speaker 16 mm) and an External

Galvanic Headset (DCT4) interface. The IHF Speaker is also used to handle the ring tone. The

IHF Speaker is driven by a discrete audio amplifier. In NHL-10 there is only one microphone

for both HS and IHF modes.

For Data connectivity there is a 115.2kbit IR Module (IrDA compatible), Bluetooth and MMC

card.

The Display is an TFT type Colour Display with 65536 Colours and 176x208 pixels with back-

lighting. The UI module features a keymat and a navigation key.

For imaging purposes, the BB supports a VGA camera via the CCP interface, which is inte-

grated into UPP_WD2.

Bluetooth

Flashing and Testing

Interface

CS7 module

MMC

card

VGA

camera

module

Audio

SIM

card

GSM

antenna

NH4