User Guide

NHL-10

CCS Technical Documentation Service Software Instructions

6 COMPANY CONFIDENTIAL ISSUE 2 01/2004

5 The installation checks that the latest supported dongle driver version is installed.

The dongle driver is installed if there is no previous installation of the dongle

driver or if the installed dongle driver is older than the latest supported version.

Note: If the dongle driver is installed during installation, you need to reboot your PC and restart the

installation after reboot.

Program files are stored under C:\Program Files\Nokia\Phoenix (default).

6 Install the data package by executing the installation package and follow the

instructions on the screen.

The data packages will create product specific directories under the installation

directory.

Data files are stored under C:\Program Files\Nokia\Phoenix (default).

Uninstalling Phoenix

If you need to remove Phoenix Service Software from your computer:

1 Make sure that the dongle is attached (unregistration).

2 Go to the Control Panel and select Add/Remove Programs.

3 Select NHL-10 Change/Remove.

4 Click OK to remove the application

You may have to reboot your PC after uninstallation.

Note: If you have different product packages installed, the components are uninstalled only if

they are not included in other product packages.

Data Packages

Data Packages (DP) is a name for a helpful feature in the Phoenix software. This type of feature

provides a flexible way of distributing and installing Phoenix and its data files.

All product-specific data is separated from the program code and installed separately. This

means that the installation is performed in at least two steps.

Each product will have its own Data Package (DP). The FPS-8 flashing equipment also has its

own package.

Starting a session

Concepts

In the Phoenix context, Product means the cellular phone attached to a PC. More specifically,

it is a particular type of phone.

Connection means the type of cable used to attach the phone to the port to which the other end

of the cable is attached.