User Guide

NSM-9DX
Service Tools CCSTechnical Documentation
Page 6 ¤Nokia Corporation Issue 1 10/02
MJS-46 Module Jig
The MJS-46 Module Jig is used for testing of UI/system/RF-module*.
Product Code
MJS-46 Module Jig: 0770316
Figure 2: View of MJS-46
*Note: The nominal supply voltage for MJS-46 is +8.0 V. The supply voltage must
not exceed +12.0 V (min. 5V). (MJS-46 has overvoltage protection). For flash-
ing with FPS-8, it is possible to bypass the regulator with a jumper. Then the
supply voltage must not exceed 5.2 V.