User Guide

CCS Technical Documentation Troubleshooting - Antennas
RH-34
Issue 1 11/2003 Confidential ©2003 Nokia Corporation Page 9
Wrong display assembly installed
Figure 10: Side view of RH-34 and RH-27 display assembly
Figure 11: Back view of RH-34 and RH-27 display assembly
Display assemblies of RH-34 (6585) and RH-27 (6225) are very similar. However, the
RH-27 display shield is different on the side from the RH-34 shield, as shown in
Figure 10 inside the blue dashed line. Second, the metal plating at the top area of the
RH-27 frame is different from the top of the RH-34 frame, as shown in Figure 11 inside
the blue dashed line. For RH-34 frame, the screw boss area is plated but isolated from
the rest of the frame, and also there is no plating in the area inside the green dashed line
in Figure 11. For the RH-27 frame, the whole top area is fully plated.
If the wrong display shield or frame is installed, replace it with a correct one.
RH-34
Display
s
hi
e
l
d
RH-27
Display
shield
RH-27 Display
frame plating
N
o plating
RH-34 Display
frame plating