CCS Technical Documentation RH-34 Series Transceivers Disassembly/Assembly Issue 1 11/2003 Confidential ©2003 Nokia Corporation
RH-34 Disassembly/Assembly CCS Technical Documentation Step-by-Step Disassembly Instructions Alway use ESD protection Disassembly Instructions Step-by-Step Disassembly Instructions (Model 6585) 1. Push the Release Button to the left before pulling up the B-Cover. Remove the battery and the SIM card. 2. Unlock the top guidance to remove the A-Cover. 3. Unscrew the six T6 screws, using the shown order. For assembly, the reverse order and a torque of 17Ncm must be used. 4.
RH-34 Disassembly/Assembly CCS Technical Documentation Step-by-Step Disassembly Instructions (Model 6585) 5. The Earpiece is adhered with double-sided adhesive tape. Use new tape when mounting the Speaker. 6. Remove the Microphone, being careful not to damage the spring contacts. 7. Open the snaps with SRT-6 on both sides of the Display Shield. 8. The Display Shield is hooked at the bottom edge. 9. Press the LCD off of the LCD Frame. Use a clean cloth as shown above. 10.
RH-34 Disassembly/Assembly CCS Technical Documentation Step-by-Step Disassembly Instructions (Model 6585) 11. To remove the DC Jack, insert tweezers between the spring contacts and under the jack. You will need to use some force to pull the jack upward. 12. Grip the Vibra Motor as shown above and pull it off of its guidance. 13. Use your fingers to remove the Volume Key and the Infrared Window. The Power Key must first be unlocked on the lower side (see inset). 14.
