CCS Technical Documentation RH-25 Series Transceivers Service Software Instructions Issue 1 10/2003 Company Confidential ©2003 Nokia Corporation
RH-25 Service Software Instructions CCS Technical Documentation Contents Page No Phoenix User’s Guide .................................................................................................... 3 Introduction ..................................................................................................................3 General Setup Procedure ........................................................................................... 3 Hardware Requirements for using Phoenix .................
CCS Technical Documentation RH-25 Service Software Instructions Phoenix User’s Guide Introduction This section briefly describes how to install Phoenix and includes some basic information on how to use the program. More detailed information can be found in the Phoenix Help files. Each feature in Phoenix has its own Help file, which can be activated whil running Phoenix. To activate a Help file while Phoenix is running, press the F1 key or the specific feature’s Help button.
RH-25 Service Software Instructions CCS Technical Documentation Hardware Requirements for using Phoenix Minimum Hardware Requirements Processor 233 MHz RAM1 64 MB Disk space needed 50-100 MB Supported Operating Systems Windows 95 Notes Limited, no USB support Windows 98 Windows NT 4.
RH-25 Service Software Instructions CCS Technical Documentation to load software upgrade files to customer-specific phone models. These bundles are created by CCS and made available by AMS on the Partners Web Page http://americas.partners.nokia.com. This web page is password-controlled; if you have not registered as a user, contact Nokia Central Service in Melbourne, Florida. Similar to the Phoenix installation, these Software Support Bundles are InstallShield executable packages.
RH-25 Service Software Instructions CCS Technical Documentation Next click the Add… button to create a new connection. When the Select Mode dialog box appears, you may then select either Wizard, which will auto-detect your connection configuration, or Manual, which allows you to manually select options to create the connection. Once a connection is defined, make sure that the one to be used is moved to the top of the list (use the up down arrows on the Manage Connections dialog box.
RH-25 Service Software Instructions CCS Technical Documentation at the bottom will indicate if the product was found and its type. Using Components When working with Phoenix, tasks are generally managed by specific software components. From the menu, select the desired component or task to be performed. “Opening a component” is defined as opening a tool window within Phoenix. When this window is opened, Phoenix also opens a toolbar for it and adds component-specific menu items in the Window menu.
RH-25 Service Software Instructions Page 8 ©2003 Nokia Corporation CCS Technical Documentation Company Confidential Issue 1 10/2003