Manualshelf

User Guide

ManualsBrandsNokia ManualsModem6510
1234
NPM–9
Disassembly Instructions
PAMS Technical Documentation
Page 3
Issue 1 02/2002
Nokia Corporation
Disassembly of NPM–9
1. DISASSEMBLY INSTRUCTIONS
Attention : Before starting this procedure you must take care of ESD precautions like being in your ESD–
area and connecting your arm wrist.
Push the unlock–button and move the battery cover
in direction to the System Connector.
Pull the A–Cover and B–Cover apart to open the unit.
Remove thesix screws with screwdriver Torx T6 in
the shown order. When assembling the reverse
order has to be taken with a torque of 17Ncm.
Before removing the UI module LU9 this clip has
to be released with a screwdriver or tweezers.
Now theUI modulecan be removed. Pleasetake care
not to damage the board to board connector
afterwards which is located on the CMT module.
Lift up the CMT module LA5 carefully. Sometimesit
happens that the battery connector gets stuck at the
SIM CardCover. Take care not to bend the spring
contacts of
thebattery connector.