User Guide

RJ-93 Rework jig

RJ-93 is used as a rework jig for the engine module.

This stencil takes the front end module (FEM) or power amplifier (PA)

module for spreading the soldering paste to the component. Must be

used together with the ST-40 stencil.

SPS-1 Soldering Paste

Spreader

The SPS-1 allows spreading of solder to the LGA components pads over

the rework stencils.

SRT-6 Opening tool

SRT-6 is used to open phone covers.

SS-46 Interface adapter

SS-46 acts as an interface adapter between the flash adapter and

FPS-10.

RM-265

Service Devices and Service Concepts

Issue 1 COMPANY CONFIDENTIAL Page 2 –11