After Sales Technical Documentation INSTALLATION INSTRUCTIONS Original, 43/95 NMP Part No.
Installation Instructions After Sales Technical Documentation AMENDMENT RECORD SHEET Amendment Number Page 2 Date Inserted By Comments Original, 45/95
After Sales Installation Instructions Technical Documentation INSTALLATION INSTRUCTIONS Contents Introduction General CAR KIT A CAR KIT B CAR KIT C Component Parts Phone Holder MBT–3 Compact Handsfree Unit PHF–5 External Antenna Adapter AAE–1 Mounting Plate MKE–7, Swivel Mounting Plates HHS–6 and HHS–7 Mobile Installation Charger LCM–1 Output Power Cable PCC–1 Power Cable PCM–5 Handsfree Microphone HFM–7 Audio Handset HSU–2 Headset HDC–2 Headset Adapter HDA–3 Cigarette Lighter Rapid Charger LCH–6 Externa
Installation Instructions After Sales Technical Documentation Introduction General This installation guide has been prepared to provide the basic information necessary to install car kits. This guide is not intended to be definitive, because different types and models of vehicle will require different installation work. The information given is for general guidance only. The terms of warranty demand that this car kit be installed by an experienced installation facility.
After Sales Installation Instructions Technical Documentation CAR KIT A MBT–3 HHS–6 HHS–7 MKE–7 LCH–6 Product Name: Type: Code: Phone Holder Mounting Plate Swivel Mounting Plate (with square stand) Swivel Mounting Plate (with triangular stand) Cigarette Lighter Charger MBT–3 MKE–7 HHS–6 HHS–7 LCH–6 0620027 0650007 0650006 Original, 45/96 0675076 Page 5
Installation Instructions After Sales Technical Documentation CAR KIT B AAE–1 HHS–6 HDC–2 HHS–7 MKE–7 MBT–3 HDA–3 LCH–6 External Mobile Antenna (not supplied) Page 6 Product Name: Type: Code: Phone Holder Mounting Plate Swivel Mounting Plate Swivel Mounting Plate Cigarette Lighter Rapid Charger Antenna Coupler Headset Adapter Headset MBT–3 MKE–7 HHS–6 HHS–7 LCH–6 AAE–1 HDA–3 HDC–2 0620027 0650007 0650006 0675076 0694029 0694017 Original, 45/95
After Sales Installation Instructions Technical Documentation CAR KIT C AAE–1 HHS–6 Cable ties HHS–7 PCM–5 LCM–1 MBT–3 MKE–7 HFM–7 HSU–2 External Mobile Antenna (not supplied) Product Name: Type: Code: Phone Holder Compact Handsfree Unit Mounting Plate Swivel Mounting Plate (with square plate) Swivel Mounting Plate (with triagular plate) Fixed Charger Power Cable Antenna Coupler Handsfree Microphone Audio Handset Cable ties Rapid Cigarette Lighter Charger (optional) Headset (optional) MBT–3 PHF
Installation Instructions After Sales Technical Documentation Component Parts Phone Holder MBT–3 The phone holder allows the phone to be firmly located in a convenient position. The phone holder is attached to the vehicle interior using mounting plate MKE–7 or alternatively swivel mounting plates HHS–6 or HHS–7. Compact Handsfree Unit PHF–5 The compact handsfree unit enables the phone to operate in handsfree mode.
After Sales Installation Instructions Technical Documentation External Antenna Adapter AAE–1 The external antenna adapter allows an external antenna to be capacitively coupled to the phone’s antenna when the phone is located in the mobile holder. The external antenna adapter is fastened to the top of the holder as shown below.
Installation Instructions After Sales Technical Documentation Audio Handset HSU–2 The audio handset is installed using a mounting plate as supplied. The handset connects directly to the compact handsfree unit. Headset HDC–2 A headset offers privacy during a call. The headset connects to the headset socket located at the base of the compact handsfree adaptor’s socket or the unit. Headset Adapter HDA–3 The headset adapter provides connections between the headset, power supply and the phone.
After Sales Installation Instructions Technical Documentation Installation There are some important aspects that require special attention in positioning car kit accessories. The positioning of the phone holder is the most important factor when trying to achieve the most comfortable position for the user. The location of the holder should be selected so that the visibility of the phone’s display is good under all lighting conditions, but not so that the driver’s attention is easily distracted.
Installation Instructions After Sales Technical Documentation • highest place in the car • proper grund place • omnidirectional radiation pattern • minimum risk for disturbances • user safety After drilling the hole for the antenna remember to clean the hole from the drilling swarf, so that surface is even. This is needed in order to ensure proper and reliable connection between the ground plane and the antenna. After cleaning it is advised to apply some rust–proofing compound to the hole.
After Sales Installation Instructions Technical Documentation This page intentionally left blank.
