Customer Care Solutions (CCS) Technical Documentation [NMP Part No.
Customer Care Solutions (CCS) Technical Documentation Amendment Record Sheet Amendment No Issue 1 11/02 Date Inserted By Comments 09/02 ViK Draft 1 11/02 MPH Issue 1 Copyright ã 2002 Nokia Corporation All Rights Reserved
Customer Care Solutions (CCS) Technical Documentation RH-13 Overall Manual Contents Contents: Section 1: Foreword Section 2: General Information Section 3: System & UI Module Section 4: Parts List Section 5: Product Variants Section 6: Service Software Instructions & Service Concepts Section 7: Service Tools Section 8: Assembly & Disassembly Instructions Section 9: Troubleshooting Instructions Section 10: Accessories Section 11: Car Kit Section 12: Schematic Diagrams Issue 1 11/02 Copyright ã 2002 Nokia C
Customer Care Solutions (CCS) Technical Documentation IMPORTANT This document is intended for use by qualified service personnel only. Company Policy Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA CORPORATION should be notified in writing.
Customer Care Solutions (CCS) Technical Documentation Warnings and Cautions Please refer to the phone's user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following: Warnings: 1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI-SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION.
Customer Care Solutions (CCS) Technical Documentation ESD Protection Nokia requires that phone repair places have sufficient ESD protection (against static electricity) when servicing cellular phones. A cellular phone, which is ready for use, can be handled normally without ESD protection. The SIM card and battery can be replaced in normal conditions of use. To replace the color cover ESD protection must be applied, except for the phone covers which can be replaced by the customer.
