User Guide

CCS Technical Documentation Service Software Instructions & Service
NPM-2NX
Issue 1 07/02 ãNokia Corporation Page 9
Service Tool Setup 2a
This setup is for flashing, testing and tuning (RF testing and tuning is not possible).
Figure 2: View of FPS-8 Flash concept
To accomplish the EM calibration, the JBV-1 must be powered by 12V external power
supply. The EM calibration can also be done by connecting the JBV-1 to a PC using a
DAU-9S cable.
Figure 3: View of Jig concept
Service Tool Setup 2b
RF testing and tuning is possible with this setup.
Figure 4: View of Galvanic concept