User Guide

NPM-2NX
Service Software Instructions & Service Concepts CCS Technical Documentation
Page 6 ãNokia Corporation Issue 1 07/02
nection setup dialog.
Selecting a product
Many of Phoenix’s features are product-specific. It is, therefore, mandatory to choose the
product you will be working on at the beginning of the session.
1Select File - Scan Product (or hold the Ctrl key down and press R). Phoenix will
scan the connected product and load additional menus which are designed for
the product. If the product is not supported then an error message will be dis-
played and a different Phoenix data package may be required.
2 If you want to manually choose the product or if the phone is dead, select File -
Choose Product. You will be presented with a list of available products.
After the product selection, you will see an additional menu item on the main
menu. If you take a look at the available menu items, you will see that their num-
ber has increased.
Phoenix environment
You can configure the program’s main toolbar and the product or tool -specific options
to your liking.
You can control which toolbars are visible by selecting View and Toolbars from the pull-
down menu. The visible toolbars are marked with a check.
The rest of the options are product or tool -specific. The tool-specific options are set
using the associated toolbar.
Using components
When working with Phoenix, each task generally has its own component that will per-
form the task. The first thing, therefore, is to open the desired component.
Opening a component means that you open a tool window within Phoenix.