User Guide

PAMS Technical Documentation 4 - Service Software
NPE-4
Original ãNokia Corporation Page 4-3
Service Software
Phoenix
Phoenix is the software tool for flashing, tuning and testing Nokia cellular phones.
It has been created for Win32 environment with COM technology and it replaces all
existing applications such as WinTesla.
Supported Operating Systems
Windows 95, 98, 2000 and NT 4.0 (SP4).
Hardware requirements for using Phoenix
Minimum:
Processor 233 MHz, RAM memory 64 MB, disk space 50-100 MB.
Recommended for Windows 2000:
Processor 700 MHz, RAM memory 512 MB, disk space 50-100 MB.
Introduction
This section briefly describes how to install the Phoenix software and includes some
basic information on how to use the program. For more detailed information, please refer
to Phoenix’s Help-files. Each feature in Phoenix has its own Help function, which can be
activated while running the program.
Press the F1 key or the feature’s Help-button to activate a Help-file.
Installing Phoenix
1 Close all programs before installing Phoenix.
2 Remember to attach dongle before starting installation.
3 Read the release notes, it has useful information about the Phoenix version.
4 Since Phoenix is made of components you may install each Phoenix installation
package on top of each other Setup will make sure that the new compnents are
not replaced by old ones
5 Install Phoenix by executing the Phoenix installation package and follow the
instructions on the screen.
Note: Afterwards all components must be registered. This is done automaticaklly and
takes 5 to 10 min.