User Guide

NPE-4
4 - Service Software PAMS Technical Documentation
Page 4-12 ãNokia Corporation Original
Files can be uploaded to the FPS-8 manually by right-clicking on the “Flash box files”
list. This will bring up this menu:
Flashing -> FPS-8 flash brings up this dialog:
“Save settings”: Backup/restore user settings (Phonebook, WAP settings, etc.).
“Automatic flashing”: Starts the flashing automatically (when a new product is
scanned or the dialog is opened).
“Manual selection”: Select flash files manually.
“Log flashing”: If you encounter problems when flashing, check this. it will create a log
file (fps8.log) when flashing. Attach this file when reporting errors.
“LPT Port”: The parallel port where the FPS-8 is connected.
Upload an FPGA file to the FPS-8
Upload an application file to the FPS-8
Upload an application file to the FPS-8
Used only if the previous item failed.
Upload an algorithm file to the FPS-8
Upload a secondary boot file to the FPS-8
Phoenix automatically
finds out which files
to flash.