User Guide

PAMS Technical Documentation 7 - Disassembly Instructions
NPE-4
Original ãNokia Corporation. Page 7-7
9. Remove the Lightguide
1 Carefully bend the two plastic bottom snaps out (1).
2 Bend out the two top plastic snaps (2).
3 Lift out the Lightguide.
10. Removing the Microphone
1 Remove the Microphone by lifting the tape (1).
IMPORTANT NOTES
1. Never re-use removed Shield Can Lids - a new lid must be fitted in order to
comply with type approval requirements.
2. When reassembling the phone, all 5 Torx screws must be tightened to 17Ncm.
3. Always use new Torx screws.
2
1
1