User Guide

PAMS Technical Documentation 6 - Troubleshooting
NPE-4
Original ãNokia Corporation. Page 6-67
Adjust DAC Values for Power Level 7, 15 and 19 according to Target values.
Press calculate, check if all levels match the target values, correct if necessary.
Press Stop and a window pops up:
Select 'Save values to Phone Permanent Memory'
Press Yes and the EGSM TX Power Level Tuning is finished.
PCN
Set operating mode to local mode
Select Maintenance Alt-M
Tuning T
TX Power Level Tuning L
Wait until the TX Power Level Tuning window pops up.
Connect a calibrated powermeter to the RF connector of the phone.
Select Band GSM 1800
Active Unit TX
Press Start and a window pops up:
Select Permanent memory, press OK and the window closes.
Select TX Data Type Random