User Guide

NPE-4
6 - Troubleshooting PAMS Technical Documentation
Page 6-60 ãNokia Corporation. Original
Press Manual tuning and a window pops up:
Connect an external signal generator to the RF connector of the phone and set the gen-
erator as told in the window.
Press OK and a new window pops up:
Set the generator as told in the window.
Press OK and a new window pops up. Repeat this sequense 9 times until all channels are
done.
Press Stop, Write to PM Area (In the RX Band Filter Response Compensation window) and
a window pops up:
Press Yes and the PCN RX Band Filter Response Compensation is finished.
RX Channel Select Filter Calibration
This calibration is calibrating the Baseband filter inside Hagar, for this reason the cali-
bration is not done in both bands.
Set operating mode to local mode
Select Maintenance Alt-M
Tuning T
RX Channel Select filter Calibration H