User Guide

NPE-4
6 - Troubleshooting PAMS Technical Documentation
Page 6-58 ãNokia Corporation. Original
Press Manual tuning and a window pops up:
Connect an external signal generator to the RF connector of the phone and set the gen-
erator as told in the window.
Press OK and a new window pops up:
Set the generator as told in the window.
Press OK and a new window pops up. Repeat this sequense 9 times until all channels are
done.
Press Stop, Write to PM Area (In the RX Band Filter Response Compensation window) and
a window pops up:
Press Yes and the EGSM RX Band Filter Response Compensation is finished.
PCN
Set operating mode to local mode
Select Maintenance Alt-M
Tuning T
RF Controls F